EUREKA ERGONOMIC L-Shaped Standing Desk 60" - Electric Height Adjustable for Home Office & Gaming

This desk overall is exactly what I wanted and looks and works great. However, there are some design flaws. 1) The screws holding the table top to the legs fell out and one go back in due to the cheap chipboard material. I barely lifted up on it and the screws came right out. 2) The screws to secure the power pack to the under of table too were long enough to go through the holes in the power pack and in to the wood, but after the other screws fell out that may be OK. I used high strength Velcro to secure the motor so it can be removed if needed. If you are comfortable making adjustments to the assembly, then this is a great desk. If not, you may want to be prepared.I am really happy with this desk. I have an ultra wide monitor that I switch between my personal pc and work laptop and everything was super cramped on my old desk. Now there is plenty of table top space for all my needs.The worktop is particle board with a textured black ‘carbon fiber’ veneer. The worktop does come in 2 parts so there is a visible seam where they meet. It doesn’t really bother me, but if it would bother you the desk comes with a huge ‘gaming desk’ branded mouse/desk pad which would cover that seam. Since I’m using a keyboard tray I didn’t end up using the giant pad. Also I don’t like the branding anyway.I added on the eureka cpu holder and the tilting keyboard tray from Stand Steady. Eureka also makes a tilting keyboard but it has obvious branding which is why I ordered from stand steady (since theirs is just plain black). These two add ons work together to make the desk super functional and ergonomic. I think the lowest desk height would be too tall for a short person to comfortably type while sitting with out the under desk tray. With the desk tray it is perfect. I also added an underdesk headphone holder with usb plugs.As some other reviewers stated the desk does wobble a little bit at the highest setting, but I am short anyways so I really only had it at max height temporarily to test it out. At my typical standing and sitting height it is solid. I did order casters to replace the stock feet but I didn’t realize that there are 5 feet and I only ordered 4 casters, so I have to wait for another caster to arrive then I will swap them out.I put 4 stars under assembly because while the manufacturer has done a good job with providing instructions/parts/etc the process is moderately difficult. There are some heavy parts that need to be handled and the desk itself is quite heavy, making the task a two person job. The manufacturer provides a simple screwdriver and Allen key but we just used our own tools (ratcheting screwdriver, powered drill) to make the job easier. I would not recommend anyone try and build this desk alone, and I think this would be a tough build for anyone who can’t lift 50 lbs or with limited experience assembling furniture.The only functional thing that is missing is a built in power strip. I ended up taping a power strip to the leg of the desk and then plugging the desk into the power strip and the power strip into the wall and couldn’t help thinking that a built in power strip would have been more convenient, since the desk has to be plugged in anyways.I'm rarely one to write reviews, but had to say, after more than a month of using this desk, I'm highly impressed. Assembly time was a bit long but not too difficult to do by myself though honestly, I recommend getting a second person to help you - the pieces are heavy.On the plus side, everything is super sturdy, the dual motors work beautifully and quietly even, and while I do use the large desk mousepad, the carbon fiber surface is suitable enough to use your mouse on it as well.Two downsides that I immediately see with this product is that the table top comes in two pieces to accommodate for the elongated side. Thankfully, everything was well-aligned and you can cover up the split with the included desk mousepad. The other, slightly more annoying issue is that the surface seems to scratch pretty easily. I found a sizeable gash on the surface after opening my box, but I needed a table right away for work and didn't want to deal with the hassle of returning such a heavy package, so I buffed it out for the most part. In any case, the gash was again covered by the desktop mat. Still, when you open yours up, check to see if the table was scratched on delivery. At least Amazon's return/exchange process isn't too horrendous if you have Prime.All in all, compared to some of the more expensive motorized tables, this is a very good, value-friendly alternative. Would recommend.Overall this is a really nice table, feels solid, steady. The motor up and down feature works great and feels like it’s high quality too.The only one minor downside is the assembly time, it took me an hour and a half approximately. But I guess it’s the price you pay if you want a table like that.The packing job is top-notch. Secure, protected, smart. Tools are provided with the desk and the instructions are easy to follow. If you want the L on the left side then you follow the -L directions and -R for the right side. Ralph Wiggum might be able to put this together.The included mouse pad is nice and effectively conceals the only minor issue I have with this desk, which is the point where the two desk tops join. The benefit to this design choice is that you can choose which side you want the L desk top.The dual motor design is a nice upgrade from my previous desk that used a single motor design. It raises and lowers evenly and smoothly. The included cable management trays are great as well.Overall, I'm very happy with this desk. Great purchase and worth the money.I really like the design of this desk, it fits my two large monitors easily and leaves room for my peripherals still. My only complaint is I wish the desk went just a little lower. The combo of my chair and the desk has me at max height on the chair. But I like everything else about this desk, and would definitely recommend it!